Porter, Russell Williams, 1871-1949
Name Entries
person
Porter, Russell Williams, 1871-1949
Name Components
Surname :
Porter
Forename :
Russell Williams
Date :
1871-1949
eng
Latn
authorizedForm
rda
Porter, R. W. (Russell Williams), 1871-1949
Name Components
Surname :
Porter
Forename :
R. W.
NameExpansion :
Russell Williams
Date :
1871-1949
eng
Latn
alternativeForm
aacr2
Genders
Exist Dates
Biographical History
Russell Williams Porter (b. Dec. 13, 1871–d. Feb. 22, 1949), American artist, engineer, amateur astronomer and explorer. He was a pioneer of cutaway illustration and is sometimes referred to as the founder of amateur telescope making.
Russell W. Porter (1928-1945). Architect and telescope maker. Recruited by George Ellery Hale to work on construction of 200-inch telescope for the Palomar Observatory.
Biographical Sketch
Although trained as an architect, Russell Williams Porter (1871-1949) made his principal mark in the field of astronomy, in both the technical and popular realms of the discipline. He served as a member of the design team for the 200-inch Palomar telescope-then the biggest telescope in the world-but he is also widely recognized in the U.S. as a leader in the amateur telescope making movement.
Porter was born in Springfield, Vermont, on December 13, 1871, and attended the Massachusetts Institute of Technology, where he studied to be an architect. While still at MIT he attended a stereopticon lecture by Robert E. Peary in 1892-this was some years before Peary's discovery of the North Pole. Smitten with "arctic fever," Porter urged Peary to include him in his next expedition, but Peary declined. However, over the next thirteen years Porter would make six arctic forays, three of these with Peary. On the last of these, with the Fiala-Ziegler expedition, the party lost their ship to ice floes and were marooned in Franz Josef Land for two years. Porter himself never reached the North Pole, but during these arctic excursions, he taught himself celestial navigation and timekeeping by the stars. He also recorded in many drawings and paintings his own adventures in, and impressions of, the arctic world. These are published in part in The Arctic Diary of Russell Williams Porter, ed. Herman Friis (Charlottesville, 1976).
Porter returned from Franz Josef Land to Maine, married and established himself as an architect, building a little community at Port Clyde on the coast. By 1910 he had begun to study telescope making, and he would continue to study and build instruments, and to encourage other amateurs to do so for the rest of his life. In 1915 Porter returned to Boston to teach architecture at MIT. Towards the end of World War I, he was called to the National Bureau of Standards to put his knowledge of optics to use. Then, having been invited by his childhood friend James Hartness to work in the latter's precision tool manufacturing company, Porter returned to his old home in Springfield, Vermont.
During these years in Springfield, Porter's fame as a telescope maker spread. His local club, the Telescope Makers of Springfield, with their clubhouse Stellafane (temple of the stars, completed in 1924), was written up in The Scientific American. That magazine's editor, Albert G. Ingalls, collaborated with Porter in the writing of the book, Amateur Telescope Making, which became a bible in its field. Annual conventions began to take place during summers at Stellafane.
In 1928, Porter was recruited by George Ellery Hale, the Director of the Mount Wilson Observatory in Pasadena and himself a famous solar astronomer, to work on the construction of the new 200-inch telescope. The world's largest telescope would eventually be operated by the California Institute of Technology in cooperation with the Carnegie Institution of Washington. Funded by the Rockefeller Foundation, the construction of the observatory and telescope on Palomar Mountain in San Diego County took approximately twenty years. During these years, Porter undertook the architectural designs for the necessary shops, labs and offices on the Caltech campus, and he contributed substantially to the mechanical and optical design work for the telescope. Almost every summer he managed to return to Vermont for the annual conventions at Stellafane.
One particular aspect of Porter's genius was his ability to do three-dimensional cutaway drawings of all kinds of mechanical objects. He had perfected this skill during work on the 200-inch telescope. With the outbreak of World War II he found that his draftman's skills were highly desired by the military to demonstrate the design of rockets and other ordnance and equipment prior to the building of prototypes. Porter also became closely involved in the design and production of the so-called roof prism, used in new, high-precision optical sights on artillery.
Although he had suffered a serious heart attack as early as 1935, Porter hoped to live, and did live-unlike Hale-to see the completion of the 200-inch telescope, which was dedicated on June 3, 1948. Porter died at his home in Pasadena on February 22, 1949.
For a complete biography, see Berton C. Willard, Russell W. Porter (Freeport, Maine, 1976).
eng
Latn
External Related CPF
https://id.loc.gov/authorities/n86864446
https://catalog.archives.gov/id/10571522
https://viaf.org/viaf/3975094
https://www.wikidata.org/entity/Q2176967
https://www.worldcat.org/identities/lccn-n86864446
Other Entity IDs (Same As)
Sources
Loading ...
Resource Relations
Loading ...
Internal CPF Relations
Loading ...
Languages Used
eng
Latn
Subjects
Astronomy, solar
Telescopes (Astronomy)
Drawings, military
Technical drawings
Telescopes
Ziegler Polar Expedition, 1903-1905
Nationalities
Americans
Activities
Occupations
Architect
Artists
Legal Statuses
Places
Los Angeles
AssociatedPlace
Death
Baffin Island
AssociatedPlace
Arctic regions
AssociatedPlace
Springfield
AssociatedPlace
Birth
Convention Declarations
<conventionDeclaration><citation>VIAF</citation></conventionDeclaration>